Drive Editor

HOW DO I INSTALL A DVD-ROM Drive and A CD-RW Drive?

WE STARTED HAVING A PROBLEM WITH THE CD WRITER,
IT WAS SAYING WE HAD NO CD RECORDER, SO WE DID FACTORY RESTORE AND IT STILL SAID THERE WAS NO RECORDER. THEN WE WENT THROUGH HELP AND SUPPORT AND IT SUGGESTED WE TRY REGISTRY EDITOR AND IT STILL DIDN’T WORK SO WE DID A FACTORY RESTORE AGAIN AND THAT ONLY MADE THINGS WORSE BECAUSE NOW MY DVD DRIVE DOES NOT SHOW UP AT ALL NOR CAN I PLAY ANY THING IN THAT DRIVE AND MY CD-RECORDER DRIVE SHOWS UP BUT I CAN NOT ACCESS IT….. AND NOW I AM AT A COMPLETE LOSS… PLEASE HELP!!!!!!!!!!!!!!!!!!!! OH AND I GOT HELP FROM HP AND THEY TOLD ME TO USE THE CD THAT CAME WITH MY COMPUTER WHEN I BOUGHT IT TO INSTALL THE CD RECORDER BUT I DONT THINK IT CAME WITH ONE… I THINK..

Did you install the DVD drive yourself, or did it come with the computer? If you did it yourself, make sure that you have the correct master/slave settings on the drive.

All CD & DVD drives today use the IDE (aka EIDE or ATA) interface to connect the drive to the motherboard. Many hard drives in computers also use the IDE interface. Most motherboards come with two IDE channels (IDE1 & IDE2), and each channel can support 2 drives (master & slave). The master takes priority when the motherboard communicates with both devices on one IDE channel.

The IDE cables are those flat/wide cables that have a connection on each end & one in the middle. If you have two devices connected to one cable, then one of the devices must be the master & the other must be the slave. If you have both as master, then it probably will cause problems.

You can change the master/slave settings with tiny plastic jumpers that are next to the connections on the back of the drive. You will have to refer to the user’s manual to make sure you have the right setting. If I remember correctly, a jumper placed in the far left position is master, and a jumper placed in the next position to the right is slave, but it may depend on the manufacturer.

You can go to wikipedia for some pictures to help in this issue
http://en.wikipedia.org/wiki/Integrated_Drive_Electronics

If you find you have a large amount of information stored in one of their computers and want to transfer some of this information to another, you will find that instead of having to connect the two computers together physically, you can only connect the flash drive, copy or transfer the information to the flash drive and make information on the new computer. This can be extremely useful if you find that you need to move between computers on a regular basis. This is the application of flash memory. As a matter of fact, more and more people are becoming users of the flash memory unit, because its large capacity and high speed ..

Looking around at how flash memory works, you'll find the information you have stored in a memory cell range. These cells store one bit information, although there are several types of flash memory cards latest available that lets you use multi-cell devices, allowing you to store much more information. This technology is easy to write and rewrite over and see that this is what basically makes flash memory so useful.

There are many types of flash memory units, but often the use of USB Flash Memory Drive.

A portable USB flash drive is simply a flash memory card that you pasted into the computer's USB port and acts as a small, easy to carry hard disk. USB means Universal Serial Bus port and only refers to the unit instead of connecting flash inside. USB drives are the cat's meow when it comes to being easy to use. Just pop in your pocket or purse and go. You just plug memory units on any computer with a USB drive. Almost a failsafe procedure provided you do know what a USB port seems. By the way, just do not disturb water, a USB flash drive is also known as thumb drive, jump drive, pen drive, key drive, tokens or USB drive simply old.

Like other flash memory drives, the USB flash memory drive enables communication between a computer and an external computer (also called peripheral) devices. The whole concept of USB is that it took of the serial and parallel ports, and made life (and games) a lot more fun. Today, USB is "the" standard method of communication all peripherals are "connected" on the computer.

Internet reference:

http://ezinearticles.com/?Usb-Flash-Drive&id=3191450

Editor: Nevada

About the Author:

Article Source: ArticlesBase.com – We use flash memory drive frequently